BZ1 Manuals =========== .. important:: The following text are hyperlinks to demonstratory videos. Click on them to get redirected to the websites. - `Manufacturers Documentation (Requires Translation Plugin) `__ BZ1 Network =========== .. image:: media/gifs/b1_wifi_connection.gif :width: 100% :align: center For network setup please connect the ethernet cable that is provided with the bz1 from the bz1 to your computer. After that set-up a static connection as explained below. Network-IPs ----------- The BZ1 has the following networks as of `17-May-2024` and may vary in future versions, the following table shows the networks .. table:: bz1 network devices ================= ================ ======== Device Network Address Password ================= ================ ======== BZ1-MCU 192.168.123.220 123 ================= ================ ======== Network via Hot-spot -------------------- Once the apps are installed users can connect to the native hot-spot of BZ1 or through the Ethernet port to access its on-board computers. BZ1 has the network address range of ``192.168.12.*``. The SSID of the Wifi network of BZ1's hot-spot begins with **UnitreeRoboticsB1-###**, where the hash tags represent the BZ1's model number and the default password is **00000000** or 8 zeros. .. important:: It is recommended to connect to the BZ1's 5G network for better connectivity. BZ1 Basic Operations ==================== The basic operations for the bz1 are provided in the User manual. Good to know commands: - Walking: START - Prone position: L2+A (Press double times to go onto standing position) .. note:: Some features are bound to the version of the bz1. .. - `bz1 Web Control `__ Once connected to the WiFi of the bz1. You can access the bz1 website by entering the following in the web addess bar ``192.168.12.1``. The bz1's Firmware version, motor temperature, vision, and control can all be accessed in here.